|
ACT FLYWHEEL INSTALLATION INSTRUCTIONS |
 |
 |
 |
|
- Inspect the flywheel packaging to be sure it is the correct flywheel for your application. Verify that all dowels are in place and that the SFI Certification sticker and serial number are on the part. Any modifications to the flywheel will void the SFI Certification and warranty.
- Install a new pilot bearing into the flywheel if required; this should be pressed in for proper fitment.
- Line up the flywheel to the hole pattern and install new factory flywheel bolts using thread locking compound for extra assurance. For some applications, bolts are provided. Always consult the factory service manual for proper torque specifications. For racing applications, consider high strength ARP (or similar) fasteners when available. Consult your bolt supplier or expert engine builder for recommended torque specifications.
- Replace clutch components using ACT pressure plate installation instructions.
If you haven't already purchased your Advanced Clutch Technology flywheel and would like to do so, click below.
 |
.jpg)
.png){kind=small}
Subscribe to this comment's feed